The Victron Cerbo-GX communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Connect through Victron's Remote Management (VRM) portal (via wi-fi or Victron GX LTE 4G-A cellular modem) or access directly using the GX Touch screen display.
Choose between the 50 or 70 GX Touch screen display.
Note: The touch screen will not function without the Cerbo GX, nor will it function with any other GX device nor any 3rd-party device.
Please choose a VE.direct cable from our store (0.3m - 10m) to connect your MPPT controller and/or BMV-712 display and/or SmartShunt. Cerbo GX can accept up to three VE.direct cables, a fourth MPPT controller can be added by using a VE.direct to USB interface.
Connect to your shore power/battery charger, generator, wind generator, fuel tanks, water tanks, there are many options.
The kit includes both the brains of the operation, the Cerbo GX, where all your connections are made and the GX Touch display (connected to Cerbo GX with one cable)
Cerbo GX is good for use with 12V and 24V systems, if you have a 48V system please contact us for supplemental hardware and instructions.
Click to download the free VictronConnect app from Google Play or the Apple app store
Spec sheet (pdf)
Manual (pdf)
Victron Cerbo GX & Touch screen kit
Cerbo GX
- weighs 2lbs
- 10" (L) × 6" (W) × 5" (H)
- Supply voltage 8 – 70V DC
- DC supply cable includes inline 3.15A slow blow fuse
- Operating temperature range -20 to +50°C
- 3x VE.Direct ports
- 3x USB ports
GX Touch 50 or 70 display
- instant overview of your system
- easily adjust settings
- Slim waterproof design (5 inch or 7inch)
- top-mountable setup and simple installation
- Display Resolution 800x480
- Cable length 2 meter
spec sheet (pdf)
Perfect monitoring & control
Instantly monitor the battery state of charge, power consumption, power harvest from PV, generator, and mains, or check tank levels and temperature measurements. Easily control the shore power input current limit, (auto)start/stop generator(s) or change any setting to optimise the system. Follow up on alerts, perform diagnostic checks and resolve challenges remotely. The Cerbo GX turns any power challenge into an effortless experience.
Please note: Bluetooth functionality is only for initial setup and configuration, it cannot be used to connect other Victron products such as SmartSolar MPPTs, Smart battery monitors. A wired connection is required using VE.direct cable and the Cerbo GX has three VE.Direct ports and three USB ports (use VE.direct to USB adaptor)
Part Number: BPP900450100
GTIN: 8719076048763